脱硫装置MMMMMMM布袋除尘器MMMMMMM离心风机

LCR
插入式扁袋单机除尘器
LCR Inserting style Filter


LCR插入式过滤器


LCR插入式过滤器(首创的插入式过滤器)

是为粒状产品的气功传导中所需要的重负

载和高过滤速度而设计的。只要将该过滤

器插入一个筒仓,就可以连须不断的进行

空气过滤。并维持很高的粉尘收集效率而

不受
空气流动的影响。本类过滤器规格范

围不断扩大,目前已超过一百二十
种不同

的过滤器,适用于处理、加工和贮藏散装

货物和粉状产品等各种情况。

LCR插入式过滤器共有叁种:


H型 有出口头可连接风扇或排放管的过滤

器。本过滤
器不受天气影响,室内外均适用。

W型 有罩过滤器。用于将过滤器置于室外

或暴露在有害环境中的压力系统。

F型 带有风扇的不受天气影响的过滤器。

通常用于低于大气压力的场合还可以附加一

个如第二页所示的消音器。

安装位置——所有Dalamatic插入式过滤器

均可按需要横置或竖置。在气动传输系统中,

LCR插入式过滤器可插在筒仓和贮藏器的顶

部。这样可以使产品与传送和过滤的空气相

分离,从而防止产品流失和粉尘干拢。收集

起来的粉尘直接回到筒仓的大收集
容器内。

LCR系列B型和W型一般置于鼓风系统中,而

F型和H型则常用于需要抽风扇减少压力的系

统中。在机械传输系统中,控制由于装卸、

运输和排放货吕而引起的粉尘可以使用置于

一封闭箱中的LCR系列F型过滤器。收集到的

粉尘可以直接回到产品的下面,这样可节省

空间,而不必使用传输管道和
其他辅助设备,

并避免了处理收集到的粉尘的问题。

LCR插入式过滤器还可置入需要进行粉尘控

制的加工机械中,如液床反应器、搅拌器、

混合器、碾靡及粉碎机,或用于粉末喷涂

室、自动切包机及各种类似机械等的通风

换气装置。


LCR Inserting style


LCR Inserting style (originally-created inserting
style filter) is designed for the heavy load high
filtering speed needed in Insert a silo into this
filter, the air will efficiency of dust-collecting
without the influence of air floating The scope
of the specifications of this filter broadens
continuously and now there are over 120
different kind of filters, it is applicable to treat,
and store bulky cargo and powered products,
etc
There are three LCR Inserting Filters

ModelH: The filter owns exit that can connect
with fan or drain. This filter would not influence
with weather, used inside and outside
ModelW: Net-filter, used to pressure system,
which can put the filter outside and expose in
harmful environment
ModelF: the filter be fixed fan do not influence
with weather. Usually used to position that
lower than
atmosphere-compressors, in this time,
can add to an
anti-noisy counter
Assemble Location-all
Dalamatic Inserting Filter can put across
or erect In the air transmission system,
LCR Inserting filter can pulse on the top
of dome and handware. After this, can separate product from air which have been transmitted
and flitted , prevent
product loss and powder drying,
collected powder
directly come back to the big
collective container,
LCR system B type and W type usually
be located in
the blow-wind system, in the meantime,
F type and H type usually used in system
which need to en-low fan’s pressure. In the machinery transmission system,
control powder that be
cause by loading and unloading, transportation,
and giving away can put to the LCR system
F type filter which in a closed case.
Collected powder can back to below the product,
in this case, can save some space,
it is not necessary to use transmission pipe and
additional equipment, avoid from the problem
that to treat the collected powder.
LCR Inserting
Filter also can put in the process of machinery
which need to have powder control,
such as
liquid-bed reactor,
distribution machinery,
combination machinery,
and smash machinery,
or used to powder coating,
auto cutting-bag and all kinds of similar machinery which through wind exchange air device.



LCR插入式扁袋单机除尘器性能表
LCR Inserting style Filter
quality tables


除尘型号
过滤面积
m²
扁滤袋
近似风量 m³ /h
清灰气源压力
(KPa)

压缩空气耗量(周期120秒)m³/h
风机
近似重量
(KG)
袋数
长度
(m)
代号
功率
(KW)
LCR-4/7
4
6
0.7
700
450
4
F1(F1)
258
SLCR-6/10
6
6
1.0
1000
450
4
F2(F1)
265
LCR-7/7
7
10
0.7
1250
450
5
F3(F2)
370
LCR-10/10
10
10
1.0
1750
450
5
F3(F2)
382
LCR-8/7
8
12
0.7
1350
600
7
F3(F2)
474
LCR-12/10
12
12
1.0
2000
600
7
F3(F4)
488
LCR-14/7
14
20
0.7
2400
600
8.5
F4(F4)
495
LCR-20/10
20
20
1.0
3500
600
8.5
F4
710
LCR-21/7
21
30
0.7
3600
600
10
F4
1090
LCR-30/10
30
30
1.0
5100
600
10
F5
1100
LCR-39/10
39
39
1.0
6500
600
13
F6
1250

下一页(上一页)